Milestone Films SC30-um-4 User Manual download pdf (Page 40)

Milestone XProtect Smart Client 3.0; User’s Manual

www.milestonesys.com Page 40 Further Configuration

detection notifications; it is not possible to use different sound files for different cameras or to

distinguish between event and motion detection notifications.

Apply to All

The Apply To All button lets you quickly apply the camera settings for the selected camera to all

cameras in the view.

Customizing Joystick Setup

Note: Even though joystick control is supported for a large number of PTZ cameras, not all PTZ

cameras may be joystick-controlled. Refer to the release note for information about joystick

support for cameras.

When a new joystick is detected by the Smart Client, a default PTZ (Pan/Tilt/Zoom) configuration

for the joystick is added automatically.

However, you are able to customize the setup for all joysticks attached to the computer running

the Smart Client.

To customize joystick setup, do the following:

1. Click the Show Application Menu button in the right side of the Smart Client’s top bar:

2. From the menu that appears, select Joystick

Setup:

The Joystick Setup window appears.

3. In the Joystick Setup window, select the

required joystick in the Selected Joystick list.

The axes and buttons available on the selected

joystick will be listed in the Axis Setup and

Button Setup sections respectively:

4. In the Axis Setup section, specify settings for

the available axes.

With a joystick, you are typically able to navigate camera

images three-dimensionally, along three axes: an X-axis,

a Y-axis, and a Z-axis, where the Z-axis refers to the

depth (zoom) level.

 Invert: By default, a PTZ camera will move to the

right when you move the joystick to the right

along the X-axis, move up when you move the

joystick towards you along the Y-axis, etc. By

selecting Invert, you are able to change this to

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 100 101

No comments

Milestone Films SC30-um-4 User Manual Page 40